Challenges and Machine Adaptations in Producing PP Corrugated Hollow Sheets Using Recycled Materials
Summary: The use of recycled plastics in the production of PP corrugated hollow sheets continues to rise. Recycled PP material offers low cost and recyclability, but its characteristics—such as wide molecular weight distribution, fluctuating melt flow index (MFI), high impurity content, and poor thermal stability—pose significant challenges to extrusion. This article analyzes the impact of recycled PP on hollow sheet production and discusses equipment adaptation technologies from raw material pretreatment, screw design, die optimization, process control, and machine configuration. Qingdao Tongsanhegu, based on extensive project experience, has developed a PP corrugated hollow sheet machine configuration designed specifically for recycled materials. This effectively solves processing pain points, helping the industry transition toward green and low-carbon manufacturing.
With the global rise in environmental awareness and stricter resource recycling policies, the recycled plastics industry is developing rapidly. As a recyclable and eco-friendly material, PP corrugated hollow sheets increasingly utilize recycled PP. Recycled PP mainly comes from waste plastic packaging, turnover boxes, and appliance casings, which are recovered, crushed, washed, and pelletized for reuse. However, due to unstable quality and large performance fluctuations, traditional production lines designed for virgin materials struggle to adapt to recycled materials. This often leads to poor plasticization, melt fracture, yellowing, bubbles, and decreased strength, severely affecting product quality and production stability.
- Characteristics of Recycled PP and Production Challenges
2.1 Wide Molecular Weight Distribution and Fluctuating Fluidity
Recycled PP undergoes multiple thermal processes and mechanical shearing, leading to molecular chain degradation and breakage. The molecular weight decreases, and its distribution broadens. The Melt Flow Index (MFI) fluctuates widely, resulting in unstable melt viscosity, pressure fluctuations, uneven extrusion, and large thickness tolerances in the sheets.
2.2 High Impurity Content and Complex Composition
Recycled materials often contain dust, sand, metal, other plastic types, inks, and adhesives. These impurities easily cause filter screen clogging, screw wear, die runner scratches, and black spots on the sheet surface, seriously affecting the product’s appearance and performance.
2.3 Poor Thermal Stability and Easy Degradation
The end groups of recycled PP molecular chains are unstable and prone to further degradation under repeated heating. This produces small molecular volatiles, leading to sheet yellowing, strong odors, decreased strength, surface pitting, or bubbles. The risk is especially high during high-temperature extrusion and long residence times.
2.4 Moisture Absorption and Volatiles
The surface of recycled materials easily absorbs moisture and retains residual cleaning agents and additives. During high-temperature extrusion, water vaporizes, and volatiles escape, easily forming bubbles, pinholes, and surface defects that affect the sheet’s sealing properties and appearance.
- Key Machine Adaptation Technologies for Recycled PP Hollow Sheet Production
3.1 Strengthened Raw Material Pretreatment System
Equip efficient crushing, washing, sorting, drying, and filtering equipment to remove impurities, moisture, and volatiles. Technologies such as multi-stage washing, density sorting, metal detection/removal, and vacuum drying can improve the purity and stability of recycled materials. Qingdao Tongsanhegu can provide customized raw material pretreatment solutions based on the quality and proportion of your recycled materials, reducing impurities and fluctuations from the source.
3.2 Optimized Specialized Screw Design
To address the characteristics of recycled materials, we optimize the screw’s L/D ratio, compression ratio, barrier section, and mixing section. By appropriately increasing the L/D ratio, setting up multi-stage barrier threads, strengthening dispersive mixing, and optimizing the venting structure, we promote uniform plasticization, impurity dispersion, and volatile extraction. This reduces the risk of local overheating and degradation. The specialized screw for recycled materials independently developed by Qingdao Tongsanhegu has been verified in multiple projects to effectively improve processing stability, reduce scrap rates, and extend equipment lifespan.
3.3 Die Runner and Die Lip Optimization
The die runner needs to be optimized for flow balance, reduced dead spots, and lowered shear heat to prevent local overheating and degradation. The die lip gap and restrictor bar design must adapt to the fluctuating viscosity of recycled materials, allowing for quick micro-adjustments to ensure uniform sheet thickness. The die material must be wear-resistant, corrosion-resistant, and high-temperature resistant alloy to enhance resistance to impurity erosion and extend service life.
3.4 Fine Control of Temperature and Process Curve
Lower the peak extrusion temperature and reduce the material’s high-temperature residence time. Use multi-stage gradient heating and precise temperature control to avoid thermal degradation. Optimize the matching of extrusion speed, haul-off speed, and vacuum degree to reduce melt stress accumulation and fluctuations. Enhance the venting system to promptly discharge volatiles and small molecular gases. Qingdao Tongsanhegu’s PP corrugated hollow sheet production line is equipped with a high-precision PLC control system and intelligent temperature control modules. It can store multiple sets of recycled material process parameter recipes for one-click recall, reducing manual intervention and improving process stability.
3.5 Upgraded Filtration and Auxiliary Systems
Add multi-stage precision filtration devices to gradually remove fine impurities and protect the screw and die. Strengthen the stability of the vacuum system to ensure uniform vacuum calibration. Optimize the cooling system to improve cooling efficiency and uniformity, reducing internal stress and deformation risks.
- Application Case and Results
A packaging company adopted the Qingdao Tongsanhegu PP hollow sheet production line adapted for recycled materials. They used a formula of 70% recycled PP + 30% virgin material to produce logistics turnover hollow sheets. Through the specialized screw, strengthened pretreatment, and fine process control, they achieved stable mass production. The sheet appearance showed no obvious black spots, yellowing, or bubbles. The thickness tolerance was controlled within ±0.1mm, and mechanical properties met industry standards. The scrap rate was controlled below 1%, and production costs were reduced by approximately 25% compared to using pure virgin materials, yielding significant environmental and economic benefits.
- Conclusion
The application of recycled PP in hollow sheet production is an inevitable trend in the industry’s green and low-carbon development. However, it faces multiple challenges, including fluidity fluctuations, impurities, and thermal stability. By strengthening raw material pretreatment, optimizing screw and die design, implementing fine process control, and upgrading auxiliary systems, we can effectively adapt to recycled materials and achieve stable, efficient, and low-cost production. Qingdao Tongsanhegu continues to deeply cultivate recycled plastic extrusion technology, providing customized solutions based on actual customer conditions. We help customers improve recycled material utilization rates, reduce production costs, and practice green manufacturing concepts while ensuring product quality.
